 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20631 rev. B 02/03 113CNQ100A SERIES SCHOTTKY RECTIFIER New GenIII D-61 Package 110 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 s sine @55 Apk, TJ= 125C (per leg) range Description/Features Units A V A V The 113CNQ100A center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 113CNQ 110 100 7000 0.67 - 55 to 175 C New fully transfer-mold low profile, small footprint, high current package Case Styles 113CNQ100A 113CNQ100ASM 113CNQ100ASL D61-8 www.irf.com D61-8-SM D61-8-SL 1 113CNQ100A Series Bulletin PD-20631 rev. B 02/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 100 VRWM Max. Working Peak Reverse Voltage (V) 113CNQ100A Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) 113CNQ Units 55 110 7000 720 15 1 A mJ A A Conditions 50% duty cycle @ TC = 150 C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) TJ = 25 C, IAS = 1 Amps, L = 30 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 113CNQ Units 0.81 1.00 0.66 0.79 1.0 32 1960 5.5 10000 V V V V mA mA pF nH V/ s @ 55A @ 110A @ 55A @ 110A TJ = 25 C Conditions TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Max. Junction Capacitance(Per Leg) Typical Series Inductance (Per Leg) TJ = 125 C VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 113CNQ Units -55 to 175 -55 to 175 0.5 0.25 0.30 C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink (D61-8 Only) wt T Approximate Weight Mounting Torque (D61-8 Only) Min. Max. C/W DC operation C/W DC operation * See Fig. 4 C/W Mounting surface , smooth and greased Device flatness < 5mls Kg-cm (*) (Ibf-in) 7.8 (0.28) g (oz.) 12 (10) 24 (20) (*) Recommended hardware 3M stainless screw 2 www.irf.com 113CNQ...A Series Bulletin PD-20631 rev. B 02/03 1000 1000 Tj = 175C 100 Reverse Current - I R (mA) 150C 125C 10 100C 1 0.1 75C 50C 25C Instantaneous Forward Current - I F (A) 100 0.01 0.001 0 20 40 60 80 100 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 10000 Junction Capacitance - C T (p F) 10 Tj = 25C Tj = 175C Tj = 125C Tj = 25C 1000 1 0 0.5 1 1.5 2 2.5 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 0 20 40 60 80 Reverse Voltage - VR (V) 100 Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 (C/W) 0.1 Thermal Impedance - Z D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single Pulse (Thermal Resistance) thJC PDM t1 t2 0.01 Notes: 1. Duty factor D = t 1 / t 2 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 113CNQ100A Series Bulletin PD-20631 rev. B 02/03 180 Allowable Case Temperature (C) Average Power Loss (Watts) 60 50 40 30 20 10 0 170 160 150 140 Square wave (D = 0.50) 130 80% Rated Vr applied DC D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 RMS Limit DC 120 see note (2) 110 0 10 20 30 40 50 60 70 80 90 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 0 10 20 30 40 50 60 70 80 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 10000 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-SPEED SWITCH FREE-WHEEL DIODE 40HFL40S02 Vd = 25 Volt DUT IRFP460 Rg = 25 ohm + CURRENT MONITOR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 113CNQ...A Series Bulletin PD-20631 rev. B 02/03 Outline Table Outline D61-8 Dimensions are in millimeters and (inches) Outline D61-8-SM Dimensions are in millimeters and (inches) www.irf.com 5 113CNQ100A Series Bulletin PD-20631 rev. B 02/03 Outline Table Outline D61-8-SL Dimensions are in millimeters and (inches) Marking Information INTERNATIONAL RECTIFIER LOGO THIS IS A 113CNQ100A WITH LOT CODE 89 09 ASSEMBLED ON WW 45, 2000 IN THE ASSEMBLY LINE "A" ASSEMBLY LOT CODE PART NUMBER 113CNQ100A 89 09 045A DATE CODE YEAR 0 = 2000 WEEK 45 LINE A 6 www.irf.com 113CNQ...A Series Bulletin PD-20631 rev. B 02/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/03 www.irf.com 7 This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of 113CNQ100ASL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |